Nowadays, house owners have grown more aware of the need for high-quality options that save energy bills. So, when it comes to installing or updating any equipment in their home, cost-effectiveness is the top priority. However, there is one critical area that you may ignore. It is an attic insulation system in your home.
Installing a new attic system significantly reduces your utility bills in the long run. But there are various aspects that need to be considered while replacing or installing new attic insulation in your house.
There are prerequisite conditions that fulfill, during the attic insulation process. It includes checking water leakage, air leaks, wear proper protection, etc. So explore the do’s and don’ts of attic insulation systems.
♦ Do’s Of Attic Insulation
1) Examine The Level Of Insulation In Your Attic: You can add extra insulation if the insulation is at or below the joist level. Ensure to remove any existing insulation from your home which is incapable.
2) Remove Any Damaged Insulation: Damaged insulation remnants can reduce your home’s overall insulation capabilities. Make sure that you remove insufficient or damaged insulation. It reduces the attic insulation cost. Moreover, the blown-in attic insulation cost varies with various factors.
3) Consult Professionals: It is never a good idea to insulate your home on your own. Without proper tools and information, you might be causing more harm to your insulation system. So it is advisable to contact a professional attic insulation installation contractor for getting the best insulation for your ceiling.
4) Before Adding Insulation, Seal All Air Leaks: Air can escape from places other than your home’s insulation. So, keep an eye out for gaps and cracks around your windows and exterior doors. You can use weatherstripping to properly seal up doors and windows.
5) Choose The Right Types Of Insulation For Your Home: You have the option of using batt or loose-fill insulation. Loose-fill insulation is ideal for layering on top of existing batt insulation to boost insulating qualities.
♦ Don’ts Of Attic Insulation
1) Don’t Make Rash Decisions: Investigate the type of insulation that best meets your needs. You must have a better understanding of your home’s age and condition, including its construction, previous insulation materials, and the overall estimated longevity of insulating material.
2) Don’t Forget About Safety: It is preferable to wear a helmet and other safety gear, such as a mask. If you are allergic to any of the insulating components, keep an emergency kit on hand.
3) Do Not Install Insulation Until Water Leaks Have Been Fixed: Check the condition of the roof and pipes in your home. Because insulating that has been wet has no insulation value.
4) Don’t Install Without Wearing Proper Protection: While the installation process, it is necessary to protect your skin from fibreglass cuts. So wear gloves, goggles for your protection.
5) Don’t Ignore Probable Heat Sources: You need to be aware of any heat source in the insulating zone. You need to take care that a non-flammable face may be required around the electric lines and chimneys.
Why Need To Hire Professionals For Attic Insulation Installation?
The cost of attic insulation installation is determined by the type and quantity of insulation selected. So, hire the best attic insulation installation services from ABC Home Services in San Diego, CA. Our professionals will perform a cost evaluation based on your attic area and provide you with near-accurate quotes based on the best insulation method and material for your attic.